ICA5ATEX, Loadcell Amplifier, Strain Guage Sinyal Şartlandırıcı

Ürünün fiyat bilgisi için bize 0312 4739791 numaralı telefondan ya da satis@testart.com.tr adresinden ulaşabilirsiniz.
.
Paylaş:
Kampanya

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Ürün Özellikleri
  • Yorumlar (0)
  • Tavsiye Et
  • Resimler
  • Beni Ara
    • ATEX certificated strain gauge conditioner and load cell amplifier
    • Miniature PCB format for fitting inside sensors, 19mm diameter, 7.6mm height
    • 2 wire current loop 4-20mA output
    • Low interaction between the trimmers makes calibration fast and easy
    • High speed 1000 Hz
    • User selectable span and zero resistors
    • Robust design, high noise immunity & reverse polarity protected
    • Option of an in-line enclosure ATEX Embedded Load Cell Amplifier, Strain Gauge Signal Conditioner (shown on thumbnail image on left)

    ICA5ATEX 4-20mA Current Output Amplifier

    Electrical & Environmental
    ParameterMinTypicalMaxUnits/Notes
    Supply Voltage Range9.024 28Volts
    Operating Temp Range-40 -85 ºC
    Storage Temp Range-40 -85 ºC
    Reverse Polarity Protection -30-Volts
    Measurements
    Bridge Excitation1.05 1.11 1.16 Volts Note 1
    Bridge Impedance350 1000 5000 Ohms
    Bridge Sensitivity0.5 2.5 55 mV/V Note 2
    Output Load-300 Ohms Note 3
    BandwidthDC-1000 Hz
    Zero Adjustment-±2%FR Note 4
    Span Adjustment-±8-%FR
    Linearity- 0.002%FR
    Temperature Stablity
    Zero Temp Stability S0.001 0.005 ±%FR/ºC
    Span Temp Stability S-0.007 0.014 ±%FR/ºC
     

    FR=Full Range (16mA)

    Note 1: 1000 Ohm load cell – Typically 0.53V for 350 Ohm cell
    Note 2: Set by calibration resistor
    Note 3: Limited by the 300Ω barrier impedance 
    Note 4: 1000 Ohms load cell – change R1 to suit other load cell impedances.

    Note: Recommended bridge impedance is 1,000 Ohms

    Note: The voltage between either of the power supply connections and the load cell shield should not exceed 50V. Any leakage will be greater than 10M Ohms.

    Environmental    
    Storage Temperature-40 to +85ºC
    Operating Temperature-40 to +85ºC
    Relative Humidity95% maximum non condensing 
    CE Environmental ApprovalsEuropean EMC Directive 2004/108/EC
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.